[root@localhost steen]# rpm file:///home/steen/Hentninger/iscan-bundle-1.0.0.x64.rpm RPM version 4.8.1 Copyright (C) 1998-2002 - Red Hat, Inc. This program may be freely redistributed under the terms of the GNU GPL
Desværre kommer der ingen skanning ud af det. Jeg får samme meddelse: "Ugyldigt argument".
Måske ligger problemet et andet sted, Jeg har installeret printeren på min kones Ubuntumaskine, den var oppe at køre med det samme. Men ingen skanner. Jeg har en gammel XP netbook ligende, skal have prøvet og se hvordan den kører på den...
If you just go the latest and greates scanner from EPSON, chances are that I've not yet added it's product ID to the backend. This means that you have to tell the backend what vendor/product IDs to look for. This is done by usign the standard Sane syntax for libusb support: "usb " - you have to replace the and strings with the data from your scanner. The new Perfection 3200 for example would use this command in epson.conf: "usb 0x4b8 0x11c".
Pu,ha! Ikke om den vil! Men jeg har set i Epsonvejledningen: "The SANE package version 1.0.3 or later must be installed before installing Image Scan! for Linux."
I Synaptic er der SANE version 1.0.24. Kan det betyde noget?
Registeret medlem #13 Oprettet: man feb 26 2007, 21:17 Indlæg: 418
Som sagt virker det her med SANE version 1.0.24. Er "Image scan" installeret under Grafik programmerne?
Hvad siger :
lsusb
om din scanners product ID
Hos mig:
lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 04b8:080e Seiko Epson Corp. PX-A550 [CX-3500/3600/3650 MFP] Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
altså Bus 003 Device 003: ID 04b8:080e Seiko Epson Corp. PX-A550 [CX-3500/3600/3650 MFP]
Nu kan man så , som "root" åbne /etc/sane.d/epson.conf
leafpad /etc/sane.d/epson.conf
og tilføje " 04b8 080e" til usb
# epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: scsi EPSON # for the GT-6500: scsi "EPSON SC" # # Parallel port scanner: #pio 0x278 #pio 0x378 #pio 0x3BC # # USB scanner: # There are two different methods of configuring a USB scanner: libusb and the kernel module # For any system with libusb support (which is pretty much any recent Linux distribution) the # following line is sufficient. This however assumes that the connected scanner (or to be more # accurate, it's device ID) is known to the backend. usb 04b8 080e # For libusb support for unknown scanners use the following command # usb <product ID> <device ID> # e.g.: # usb 0x4b8 0x110 # And for the scanner module, use the following configuration: #usb /dev/usbscanner0 #usb /dev/usb/scanner0
gem. Genstart Aben Kontrolsenter > Maskinel > Opsætning af scanner og se om den nu er genkendt
I Grafik har jeg: Simpel Scanning, Scanlite, Xcam, Xsane Xscanimage (skulle jo lige prøve . Men ikke Image scan, heller ikke i synaptic. lsusb siger:
[steen@localhost ~]$ lsusb Bus 002 Device 005: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse] Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 04ca:3006 Lite-On Technology Corp. Bus 001 Device 003: ID 04f2:b32c Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [steen@localhost ~]$
Suk, det kører lidt rundt i øjeblikket. [steen@localhost ~]$ lsusb Bus 002 Device 005: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse] Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 04b8:08a8 Seiko Epson Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 04ca:3006 Lite-On Technology Corp. Bus 001 Device 003: ID 04f2:b32c Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Nå men jeg får samme svar:
[root@localhost Hentninger]# rpm -ivh file:///home/steen/Hentninger/iscan-bundle-1.0.0.x86.rpm/scanner/data/iscan-data-1.36.0-1.noarch fejl: not an rpm package fejl: file:///home/steen/Hentninger/iscan-bundle-1.0.0.x86.rpm/scanner/data/iscan-data-1.36.0-1.noarch: not an rpm package (or package manifest): Er et filkatal PS. jeg har opdateret kernen.
Registeret medlem #13 Oprettet: man feb 26 2007, 21:17 Indlæg: 418
her på min 64bit maskine
su Password: [root@localhost]# cd Downloads/ [root@localhost Downloads]# cd iscan-bundle-1.0.0.x64.rpm [root@localhost iscan-bundle-1.0.0.x64.rpm]# cd data [root@localhost data]# ls iscan-data-1.36.0-1.noarch.rpm [root@localhost data]# rpm -i iscan-data-1.36.0-1.noarch.rpm
Åbner jeg nu synaptic, kan jeg se at iscan-data er installeret
Så er der nyt blad med Resizing Graphics Files, Revisited Repo Review: Midori Grisbi Revisited, Part Three: Importing Other File Formats Inkscape Tutorial: More Text Tricks
[ PCLinuxOS.dk ]
printerproblemer
. Men ikke Image scan, heller ikke i synaptic.